Is there any firing pin rebound spring in Rossi Puma?

gelandangan

Pull mine apart clean it and reassemble..
I think I lost it.

I cannot see it in the parts diagram, either I am blind or there is none..
Gah Scratch

It is Rossi Puma .357 magnum circa 1990 ish, the older one without safety on the slide.

dhc4ever

If this is the gun you have, rossi 92, then looks like no spring on the firing pin.
It has an ejector spring though.

marauder.homestead.com..._parts.htm

This the correct rifle?

BigBlue

If it's the same as my Rossi R92, they can be a bugger to take apart and put back together. I took it apart for some cleaning and to replace the ejector spring. For the life of me, I don't remember a spring on the firing pin. Mine had the bolt mounted safety which I replaced with Steve's Guns peep sight.

Vince

I think the Rossi is a copy of the Winchester Mod 1892 and earlier Mod 94, so no, there is no firing pin spring mate.

gelandangan

Ya thats the one M92.
I coulda swore that there were some rebound on the hammering face before..
I mustahafbeen mistaken.

Thanks guys.

pete4d

gelandangan,, check the diagrams on this site

www.stevespages.com/page7b.htm

gelandangan

Thanks Pete, yes I did pore through the diagram.
Definitely no spring on the firing pin.
My memory must have played.. I am getting an introduction into the "oldies" club mayhaps.

dhc4ever

Yep,
Thats how it starts.....