Self Regulating Gas Plug for the M14/M1A - Prototype Stage

Dimitri · Super Member Joined: Nov 25, 2005 Posts: 5947

A little project I have been working on ... a self regulating port pressure gas plug for the M14/M1A type rifles.

This should allow virtually any weight/powder combination including "light mag" commercial loads to be used out of a otherwise standard M14 type rifle.

Nothing to complicated. Similar systems are used in power control systems using pneumatics/hydrolics to control over pressure. Steam engines also used a similar method. I just adopted it to work with the M14/M1A rifles. The unit itself is small, doesn't sick out all that much more then the original gas plug (consider everything on the right side (narrow shaft) is to scale to the rest of it based on my M1A gas plug).

Proper 2D drawings to follow, once I redo all the math to check everything's ability to work properly.

Dimitri

slimjim

Burning the midnight oil, I see. Will this be a product you bring to market?

Dimitri · Super Member Joined: Nov 25, 2005 Posts: 5947

Jim,

After it all seems to be right I will contact a couple of manufacturers and see who would be interested in making them, just before any 2D drawings become available. I wont be asking for royalties or anything so I hope there will be interest in making them.

Dimitri

Vince

Well done 'Mitri...you are really starting to star now that you have finished your training.

I don't think that you will have too many problems getting this product onto the market, assuming it does exactly what you say it will.

Cheers, Vince