Advice on .270,.300 and .338 win mag

irishbandit

I am looking for some specific help on a few loads.I am new to reloading and have an older speer manual{11th} I think and rely mostly on the internet.I am well aware to stay under max loads and try to cross-reference if possible then work my way up.
1st]I have Speer 225gr spbt in .338 and H4831sc powder,I am looking for info on this combo
2nd} I have 180 gr Nosler accubonds and H4831sc powder,I am looking for all paticulars for this combo for my 300 win mag
3rd] Final info I am looking for is for my daughters .270 win.
I have IMR 4350 and 150gr Nosler partitions for this project.
Without the current manuals I can't find this info and would appreciate a little help from those of you that are reloading guru's.Cheers Steve.

Pumpkinslinger

Hodgdon's website has the information for the powders you're using.

I don't have the latest Nosler manual but ...

From Speer #14:
.338 Win Mag Speer 225 gr BTSP and H44831SC
Start load 69.0 gr for 2611 ft/sec. MAX 73.0 gr for 2761 ft/sec

fireball 3

www.nosler.com/index.php Then clic on the info tab, it will bring up a page for ballistics and load data.
If you go to this site you might find some help .I did with my 8mm's..Dave

Deleted_User_2665 · Super Member Joined: May 06, 2006 Posts: 380

Steve,

Do yourself a big favor and go buy a couple updated reloading manuals.

I tend to lean heavily on manuals put out by bullet manufacturers, and not so much on powder makers....

Website info is great, providing it comes from a manufacturer, but I want a hard copy to come back to if needed.

150 gr. Noslers and IMR4350, BTW, is some kickazz mojo. Ran that very same combo in my .270 win before I rebarreled it to 30-06.

Try TSX's in all three if you REALLY wanna drop the hammer................

Vince

Steve...I agree totally with Wilds. Nothing beats the latest data that is available.

Don't forget the easiest data to access is right here too mate...Point Blank Reloading Database.

Cheers, Vince

irishbandit

Thanks guys!