| View previous topic :: View next topic |
| Author |
Message |
gelandangan
Super Member
Joined: May 07, 2006
Posts: 6401
Location: Sydney Australia
|
 Posted: Sun Feb 09, 2014 5:38 pm Post subject: Well heheh.. more knife built |
 |
My latest work for the past few weekends..
I planned to make a golok out of H-13 steel, the H-13 would form bainite easily and Bainite are very tough steel type, just right for a golok or machete.
Design stage
First grinding
Drilling the tang
Scalloping the tang to shed some weight
After heat treating
Preparing for scales
Ugh.. cedar grinding is definitely disgusting.. even with a facemask, I ended up coughing for a couple of hours afterwards..
Love the look of the scales tho..
Here is after a coat of linseed oil
Still to do:
Need to clean up the blade a bit more, give it a final polish and a good edge.
Then to make a sheath for it... I think it would be leather sheath.
_________________
A straight line is the shortest distance between two points.
A smile is the shortest distance between two people.
Do - Not try!
gelandangan.weebly.com/ |
|
| Back to top |
|
 |
Elvis
Super Member
Joined: Jul 27, 2008
Posts: 9261
Location: south island New Zealand
|
| Posted: Sun Feb 09, 2014 6:02 pm Post subject: Re: Well heheh.. more knife built |
|
very nice as always.
_________________
You shot it You pluck it !
Them who eats the most duck eats the most feathers! |
|
| Back to top |
|
|
Pumpkinslinger
Super Member
Joined: Sep 22, 2007
Posts: 5003
Location: NC foothills
|
| Posted: Sun Feb 09, 2014 6:32 pm Post subject: Re: Well heheh.. more knife built |
|
Looks great Gelan!
_________________
Mike
"I ain't no better than anybody else, and there ain't nobody better than me!" Ma Kettle |
|
| Back to top |
|
|
slimjim
Super Member
Joined: May 16, 2009
Posts: 8316
Location: Fort Worth TX
|
| Posted: Sun Feb 09, 2014 7:09 pm Post subject: Re: Well heheh.. more knife built |
|
Love it! Great craftmanship gelandangan!
_________________
"To anger a conservative, lie to him. To anger a liberal, tell him the truth." - Theodore Roosevelt
"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein |
|
| Back to top |
|
|
Suzanne
Super Member
Joined: Jun 27, 2009
Posts: 3323
Location: Eugene, Oregon
|
| Posted: Sun Feb 09, 2014 10:31 pm Post subject: Re: Well heheh.. more knife built |
|
Lovely wood! Nice blade shape, wondering what you use to shape the metal with. Angle grinder? die grinder? bench grinder? It's just that you have a very steady hand.
Suz
_________________
May the moon keep you centered,
May the sun keep you dancing,
And the stars shed light on your dreams. |
|
| Back to top |
|
|
gelandangan
Super Member
Joined: May 07, 2006
Posts: 6401
Location: Sydney Australia
|
| Posted: Sun Feb 09, 2014 11:33 pm Post subject: Re: Well heheh.. more knife built |
|
Hi Suz
I modified a linisher (belt grinder) to do the job.
LOL I have steady hands because I dont do ... 
_________________
A straight line is the shortest distance between two points.
A smile is the shortest distance between two people.
Do - Not try!
gelandangan.weebly.com/ |
|
| Back to top |
|
|
dhc4ever
Super Member
Joined: May 26, 2011
Posts: 2944
Location: Ipswich, Queensland Australia
|
|
| Back to top |
|
|
Vince
Site Admin
Joined: May 25, 2005
Posts: 15725
Location: Brisbane AUSTRALIA
|
|
| Back to top |
|
|
shrpshtrjoe
Super Red Neck Member
Joined: Jan 26, 2005
Posts: 2965
Location: Maryland
|
|
| Back to top |
|
|
Aloysius
Super Member
Joined: Nov 03, 2009
Posts: 2440
Location: B., Belgium
|
| Posted: Mon Feb 10, 2014 6:21 am Post subject: Re: Well heheh.. more knife built |
|
"Scalloping the tang to shed some weight"
do you fill it up afterwards with epoxy or so? I don't think it's easy to shape the wood on the inside till it fits the steel when it got the shape you made.
Or you are not bothered with the strength and allow some airspace between wood and steel?
But the shape and result is very nice. You can scare some rabbits with that  |
|
| Back to top |
|
|
gelandangan
Super Member
Joined: May 07, 2006
Posts: 6401
Location: Sydney Australia
|
| Posted: Mon Feb 10, 2014 2:33 pm Post subject: Re: Well heheh.. more knife built |
|
The scales are glued on with epoxy,and the holes are filled with it too.
The reason why there are so many pins is so that the scales attachment get more strength around the edges where it is actually joined on.
_________________
A straight line is the shortest distance between two points.
A smile is the shortest distance between two people.
Do - Not try!
gelandangan.weebly.com/ |
|
| Back to top |
|
|
PaulS
Super Member
Joined: Feb 18, 2006
Posts: 4330
Location: South-Eastern Washington - the State
|
| Posted: Wed Feb 12, 2014 8:26 pm Post subject: Re: Well heheh.. more knife built |
|
You do some mighty fine work. My granddad on my mothers side taught me a little about making knives. He had a belt grinder that he made to grind the blades. I do mine by hand with no power tools but it takes forever. I don't get to do anything until my darn garage and shop are finished. I can't even reload til I get them finished.
_________________
Paul
__________________
Speer, Lyman, Hodgdon, Sierra, and Hornady = reliable loading data
So and So's pages on the internet = NOT reliable loading data
Always check data against manuals
NEVER exceed maximum listed loads |
|
| Back to top |
|
|
gelandangan
Super Member
Joined: May 07, 2006
Posts: 6401
Location: Sydney Australia
|
| Posted: Mon Apr 21, 2014 6:40 pm Post subject: Re: Well heheh.. more knife built |
|
This is how the project ended up, The blade is packed and now is in the tender hands of Australian Post 
I have had a lot of fun making this golok, I do wish there are a bit more time so I could actually make timber sheath like what it should be for this style of golok.
But due to time constraint, this is not realized.
Some statistics
Steel: H13 at about 55 HRC tested with RC files
Scale: Mackay Cedar
Sheath: Leather
Length overall: 340 mm
Blade: 180 mm
Flat ground, with convex cutting edge.
_________________
A straight line is the shortest distance between two points.
A smile is the shortest distance between two people.
Do - Not try!
gelandangan.weebly.com/ |
|
| Back to top |
|
|
PaulS
Super Member
Joined: Feb 18, 2006
Posts: 4330
Location: South-Eastern Washington - the State
|
| Posted: Mon Apr 21, 2014 7:02 pm Post subject: Re: Well heheh.. more knife built |
|
Looks like a sandwich knife...
You can spread the mayo on the bread and slice off some roast beast to go between the slices.
It is as beautiful as any table cutlery I've seen.
Great job of metal smithing.
_________________
Paul
__________________
Speer, Lyman, Hodgdon, Sierra, and Hornady = reliable loading data
So and So's pages on the internet = NOT reliable loading data
Always check data against manuals
NEVER exceed maximum listed loads |
|
| Back to top |
|
|
Elvis
Super Member
Joined: Jul 27, 2008
Posts: 9261
Location: south island New Zealand
|
| Posted: Mon Apr 21, 2014 7:58 pm Post subject: Re: Well heheh.. more knife built |
|
that would be great as a cleaver to wack up mutton chops...mmmm Im getting hungry
nice work.
_________________
You shot it You pluck it !
Them who eats the most duck eats the most feathers! |
|
| Back to top |
|
|
|
|
Latest: patrad69
New Today: 0
New Yesterday: 0
Overall: 13133
People Online:
Members: 0
Visitors: 140
Total: 141
Visitors:
BOT:
Forum FAQ
Search
Log in to check your private messages
Login
