Like Elvis, the first place I looked was the ADI Handloaders data.

My powder of choice would be Varget (AR2208) and looking at the data for the 180gn and 215gn bullets I note that there is a 1.5gn difference (41gn - 180gn bullet and 39.5gn - 215gn bullet). I think Gelan has hit the nail squarely on the head with 39.2gn of Varget mate...although the other two loads look good as well.

I found this info on the net Punkin...it may be of use to you mate.

303 Britsh load data

As usual mate...start a few grains lower and work up whilst checking for pressure signs.

Cheers, Vince

I have 2 of Uncle Nicks books but as usual when you need 1 you can't find either

if that Nick Harvey its not in my edition either!!!
pumpkin ifn you are after a plinking load see if you can beg/borrow/aquire some 125grn .311 projectiles intended for 7.62x39mm Im told they work fine and dandy and the recoil would be sweet stuff all.

gelandangan what software is that you are using?

Hi Cougar, I use Necronos's QuickLoads
www.neconos.com/details3.htm