Search found 38 matches

[quote]The data in that link started at 44.0gr and went up from there !!!
[/quote]

The data in the link is for the 7mm-08, the OP is referring to the 7mm-08 AI (Ackley Improved) Starting at Max ...

The best way to determine Trim-to Length for any rifle especially a Semi-Wildcat like the 7MM-08 AI is with a Sinclair Chamber Length Gauge. They cost $7 and will tell you exactly what your Max case ...

I load for a couple Ar-15s and a few other semi-autos as well. I have never found the need for a small base die. I do however crimp all my semi-auto loads with the Lee Factory Crimp Die. I have fou ...

Yeah, I read that too. Wonder if they are going to sell any of that "Magic" powder they have been using in their Leverevoution ammo. I didn't think so either.

Loading to the lands is not always the best place for accuracy. According to Barnes, most rifles have two OAL sweet spots, one up close to the lands and another much shorter. Here is and article by ...

[quote="DallanC"]Do you have the bill # that is being pushed through?

-DallanC[/quote]

This legislation is State not Federal. Each state has their own number. Maybe this will help.

htt ...

http://www.lapua.com/fileadmin/user_upload/esitteet/VihtavuoriInternationalReloguide2008.pdf

http://data.hodgdon.com/main_menu.asp

http://www.alliantpowder.com/reloaders/RecipeList.aspx?gauge=&g ...

I found the article by Barnes. It also has some interesting reading on "Crimping" if you are interested.

http://www.barnesbullets.com/resources/newsletters/bullet-n-archive/september-2007-barnes-b ...

[quote="GroovyJack"]Sorry I dont buy into the boss crap , I understand the harmonics and all , but jus another gimmick ..[/quote]

Are you a sceptic of the "barrel Tuners' via first hand experie ...

[quote="chambered221"]Evryone wants to seat their bullets as close to the rifling as possible. The reality is in most cases it can't be done if you want the ammo to feed from the magizine box.

When ...

http://www.reloadersnest.com/frontpage.asp?CaliberID=321

Lee Collet Die

[quote="dakota1"]
I understand the concept from wildswalker, but what is the actual technique? How is the die adjusted to get the partial resizing effect? This is new to me, details would great.

...

The Lee Collet Die squeezes the neck around a mandrel. With a standard neck die the neck is usually undersized and then opened back up to the desired size with the expander button. Pulling or pushin ...

That's a good question. I have a couple of Redding Body Dies, and here is what I use them for. I neck size with a Lee Collet Die. I have found that the Collet die produces very concentric brass com ...