Search found 11 matches

does anyone know where i can find lead for cheap? none of the local tire shops have the wheel weights anymore. and ive been looking over ebay for the past couple weeks and its hard to find without goi ...

ya ive tried varget before and like it. its just hard to get ahold of.

ok so i dropped the charge to 45gr bl-c2 and started going up. the cases started sticking at 46gr and a few at 45.5gr so i dropped it to 45.3gr and no more problems with that. velocity averaged @ 2815 ...

will do

ok thanks. i normally dont use the crimp groove on the bullets because i seat the bullet out too far for that. but thanks for the info. i'll try that and see what happens tomorrow.

ok so too much pressure and what about the crimp? too much of one? or is that what your thinking is hanging it up? i am using the lee factroy crimp

this is a load tha i was useing in my other rifle, but i redused it and worked my way up for this one cuz of the differance in rifles. for the velocity goes i thought i had run the over a chronograph ...

i think it is just sticking in the chamber but i dont know why. and i dont know about the factory ammo as i have never used any in this rifle since i got it. and there doesent seem to be anything impr ...

i have a somewhat new rifle. savage 10fp in 308. i am having an issue with extracting cases. the chamber is clean and is the ammo. it seems to work perfectly with new brass. but doesent want to extrac ...

if your useing a 223 personally i would use a 40-55gr nosler Balistic tip and hodgdon bl-c2. this is my favorite combination. it is also what i use for most of my hunting in the 223. and they work gre ...

i know your talking about an AR with 55gr BT's. but i have always used the noslers in my bolt gun. and gotten a fairly high velocity range with them. i havent dond velocity testing with the 55 grainer ...