View previous topic :: View next topic |
Author |
Message |
rrogacki Member
Joined: Apr 22, 2006 Posts: 135 Location: Pennsylvania
|
Posted: Sat May 13, 2006 1:41 pm Post subject: Prefered Bullet Weight For A Given Barrel Twist |
|
Forget all the other aspects of creating a load, has anyone found that a particular weight bullet will always shoot more accurately given a particulat rate of twist for a given caliber. An example would be a 95 grain bullet for a rate of twist of 1 turn in 10 for a 243. I am curious, there have been a few reloading myths busted here over the last few weeks and would really like to see what some of the senior (and I don't mean old) members think.
|
|
Back to top |
|
|
Deleted_User_2665 Super Member
Joined: May 06, 2006 Posts: 380
|
Posted: Sat May 13, 2006 2:38 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
The length and weight of a bullet weigh heavy on a matching twist.....that's a law of Physics......noone can argue that.
That said I've had the Law twist itself on at least one chambering by shooting light/short as well as long/heavy...........with crap in the middle.
I've also had at least one shoot outstanding in the middle but nuthin' on the outsides.........
My experienced eye relates that each shooter is different, liking only certain componentry and puking others, some have a bigger profit margin in the black than others thus liking a broader range.......
'Course there is always the rare circumstance............
|
|
Back to top |
|
|
Crackshot Super Member
Joined: Oct 23, 2005 Posts: 1693 Location: Mich
|
Posted: Sat May 13, 2006 6:40 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
I have seen my 1-9 twist 223rem shoot 40gr Vmax bullets like there is no tomorrow. And being told that should not happen, have had to prove it. and made a few bucks doing it.
It depends greatly on your rifles likes and dislikes, powder charge and what not IMO.
|
|
Back to top |
|
|
rrogacki Member
Joined: Apr 22, 2006 Posts: 135 Location: Pennsylvania
|
|
Back to top |
|
|
Crackshot Super Member
Joined: Oct 23, 2005 Posts: 1693 Location: Mich
|
Posted: Sun May 14, 2006 1:55 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
I think that it depends on the powder charge and the rifle, shoot them all, find out what it likes, Bullet weight and barrel twist is a facter, but can be gotten around with alittle experimenting.
_________________ The human mind is the weapon, the gun is just one of its tools. |
|
Back to top |
|
|
guncollector Member
Joined: Apr 25, 2006 Posts: 68 Location: Houston, Texas
|
Posted: Thu May 18, 2006 12:21 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
As previously noted, a lot of factors effect accuracy. Twist rate in relationship to bullet length and weight is definitely one of the factors and not a myth. For example, a standard AR15 comes with a 1:10 twist and shoots 55 grain bullets great. If you want to shoot heavier bullets, like the 77 grainers I use in competition, you need a faster twist barrel. My competition AR has a 1:8 twist. Try shooting a 77 grain bullet in a 1:10 twist barrel and it will not stabilize. You will find "keyhole" patterns on your target where the bullet went through at an angle off horizontal.
_________________ If the Government doesn't trust us with our guns, why should we trust them with theirs? |
|
Back to top |
|
|
Flint54 Member
Joined: Apr 09, 2005 Posts: 389 Location: North Carolina
|
Posted: Thu May 18, 2006 9:00 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
Thought I would interject some information into this discussion. I would like to caution against using bullet weight as a determining factor in the selection of a specific twist. The most critical factor is no longer the weight of the bullet, legnth of the bullet is more a factor. That being stated let me explain.
We now have at our disposal bullets filled with tungsten dust or inserts of the same, this raises the weight of a bullet but also shortens the legnth so in actuality this bullet could be used in a slower twist.
On the other hand, we also have quite a selection of monometal bullets, GS Custom, Barnes, J36s etc. These bullets have a longer legnth vs. bullet weight as compaired to standard bullets. These longer bullets require a faster twist. As an example look at the 6MM Remington, the originals used a 1in14 this did not stabilize hunting weight bullets, now with lighter monometal bullets even in the weight that it would shoot they are too long to properly stabilize.
This can be a factor in any caliber, watch your bullet legnth.
|
|
Back to top |
|
|
Dimitri Super Member
Joined: Nov 25, 2005 Posts: 5973
|
Posted: Thu May 18, 2006 9:32 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
I've read a long time ago exactly what Flint is talking about.
Bullet Lenght is what determains the twist rate not the weight. Generally thought the heavier the bullet the longer the bullet hense why you need faster twist rates. This only applies to bullets made of copper and lead, and running at standard velocities as the speed can effect it. The Greenhill Formula is for this.
Greenhill Formula (from stevespages.com/page8e.htm ):
FOR VELOCITIES UNDER 2,800 FPS
twist rate = (150 * bullet diameter squared) / bullet length
bullet length = (150 * bullet diameter squared) / twist rate
FOR VELOCITIES OVER 2,800 FPS
twist rate = (180 * bullet diameter squared) / bullet length
bullet length = (180 * bullet diameter squared) / twist rate
Hope this calculation helps
Dimitri
_________________ A thousand hills, but no birds in flight, ten thousand paths, with no people's tracks. A lonely boat, a straw-hatted old man, fishing alone in the cold river snow. |
|
Back to top |
|
|
PaulS Super Member
Joined: Feb 18, 2006 Posts: 4330 Location: South-Eastern Washington - the State
|
Posted: Thu May 18, 2006 10:11 pm Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
That works for the maximum length of bullet that will stabilize but what about a shorter bullet? Where do you draw the line with a shorter bullet.
A case in point is my 358 Winchester that shoots 158 grain Sierra JHC pistol bullets to .33 inch groups with a muzzle velocity of 2508 fps.
I figured that these bullets would either fly apart (due to speed and rotation) or hit the target in keyhole patterns. To my ammazement they are as accurate and as stable as anything I shoot from it. It shoots the Speer 180 grain bullets almost as well.
I also shoot 110 grain RN bullets from my 3006, that should be way over-sablized, very well too. The '06 has 1 in 10 twist and is most accurate shooting a 165 grain bullet but will shoot 120 grain bullets without any sign of keyholing. Somebody needs to find a better formula for calculating how to stablize a bullet. I am not going to volunteer for this one - my last formula has generated too much controversy for its value and took too long to calculate.
_________________ Paul
__________________
Speer, Lyman, Hodgdon, Sierra, and Hornady = reliable loading data
So and So's pages on the internet = NOT reliable loading data
Always check data against manuals
NEVER exceed maximum listed loads |
|
Back to top |
|
|
george20042007 Super Member
Joined: Jan 27, 2006 Posts: 568 Location: Arizona
|
Posted: Fri May 19, 2006 1:44 am Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
The June 2006 issues of Shooting Times addresses this issue on starting on page 54. Chec k it out if you care to.
Keep it coming...
|
|
Back to top |
|
|
Flint54 Member
Joined: Apr 09, 2005 Posts: 389 Location: North Carolina
|
|
Back to top |
|
|
mc223 Member
Joined: Apr 02, 2006 Posts: 115 Location: S/E Kansas
|
Posted: Fri May 19, 2006 2:01 am Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
In the process of developing loads for 223, I discovered that some of my loads shot better groups than some others as would be expected. discounting powder and primer variables.
What stood out the most was when I noticed that some of the lighter and consequently shorter bullets did not group as tightly as the heavier and consequently longer bullets.
It was at about the same time I bumped into the Greenhill formula.I started messing around with the numbers from the loads I had been working on and sure enough there is a direct correlation between the accuracy result I had seen and the actual barrel twist of my rifle.
Even though there may be what seem to be gaps in the actual performance of certain bullets at a given twist rate, I believe the Greenhill formula can be used as a guide to what may be the best place to start when developing loads for a given twist rate.
The Greenhill formula does not care what the bullet weighs, only length and diameter squared are used.
Over stbilization really only comes into play when the target distances are very long as described in an earlier post.
Speed of rotation is relative to time in flight. A 1 in 12 twist creates 300 revolutions in 100 yds. not terribly fast rotation considering the distance covered. if calculated in revolutions per minute(somethig like 34,000 RPM), it makes you wonder why bullets dont just fly apart as soon as they exit the muzzle. Bullet manufacturing and materials have improved a lot since the old days when bullet jackets were too thin for the velocities at all but the slowest twist rates.
_________________ Lettin' the cat outta the bag is a whole lot easier'n puttin' it back. |
|
Back to top |
|
|
Flint54 Member
Joined: Apr 09, 2005 Posts: 389 Location: North Carolina
|
Posted: Fri May 19, 2006 6:01 am Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
As an input to this thread Gerard Schultz of GS Custom Bullets in South Africa has a plethora of information on his web site. His Documentation of Monometal/Copper bullets puts Barnes to shame. I even think that Barnes somewhat copied his HV design in the negitive for their Triple Shock line of bullets. Take a look at his data and you can glean much information on the use of this style of bullet.
Links:
www.gsgroup.co.za/faqb...twist.html
www.gsgroup.co.za/07faq.html
www.gsgroup.co.za/hvtech.html
|
|
Back to top |
|
|
Crackshot Super Member
Joined: Oct 23, 2005 Posts: 1693 Location: Mich
|
Posted: Fri May 19, 2006 8:22 am Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
While I have shot Seirra 168gr MHP bullets for years with great results, a few years ago I had a custom rifle put together and was talking to the riflesmith about the barrel, He recomended twist rates and so on and so forth, the twist rate of my M1A came up and he asked If I was shooting 200 or 220gr match bullets in it, I said no,
he was amazed I could hit anything as the 1-10 rate is not meant for (in his oppinion) 168gr bullets in 308 win. But he was the first to say"you never know what a rifles gonna decide it likes"
After I was done with him, I went to the shop and grabbed a box of 200gr Seirra's and they shot like they came out of a sling shot.
I have a AR-15 with a 1-8 twist that shoots 50gr bullets like a lazer.
_________________ The human mind is the weapon, the gun is just one of its tools. |
|
Back to top |
|
|
george20042007 Super Member
Joined: Jan 27, 2006 Posts: 568 Location: Arizona
|
Posted: Sat May 20, 2006 10:32 am Post subject: Re: Prefered Bullet Weight For A Given Barrel Twist |
|
I have to admit this is one subject I never gave much thought to. Since I don't have a custom gun and by off the shelf, I subscribe to trying out many different loads to see "what the gun likes". As most manufacturers build according to whats most likely out there in the way of ammo, and ammo manufacturers do something similar, it boils down to trial & error.
This is the reason why so many of us reload. It's part of the fun & with it comes bragging rights when you come up with the load of loads for a given gun. I do avoid thin jacketed bullets at all costs when it comes to small calibers of high velocities, it just makes sense.
I'd like to know how many of you are like me. Should we give barrel twist more consideration or see what the gun likes?
Keep it coming...
|
|
Back to top |
|
|
|