:: Forums »

#1: reloading 30-06 shells Author: kentucky hareraiser, Location: kentucky

Posted: Tue May 19, 2009 4:06 pm
----
alright ,now that i know what kind of gun i have,i'm gonna send a few bullets down range . i have VARGET powder,and i have IMR 4064 to load the 30-06 shells . i'll be pushin' 165 grain sst in the rifle.anyone have any suggestions on the grainage of each powder i should use . i figure i'll load 6 of each and go from there .. thank's

#2: Re: reloading 30-06 shells Author: Pumpkinslinger, Location: NC foothills

Posted: Tue May 19, 2009 5:14 pm
----
I suggest you get some manuals that have the info you need in them...

#3: Re: reloading 30-06 shells Author: Bushmaster, Location: Ava, Missouri

Posted: Tue May 19, 2009 7:40 pm
----
Eeeek!!! First question...Do you have a reloading data manual? Which one? Have you read it if you do have one or two [is better]?

I have to agree with Pumpkinslinger. Besides...I don't use any of those powders...

#4: Re: reloading 30-06 shells Author: chambered221, Location: Lost for good !!!

Posted: Tue May 19, 2009 8:17 pm
----
I always use the bullet maker’s manual for load data!!!

The Hodgdon Reloading Data Center will give you a good idea and reference for a starting point. They list both Varget and IMR4064

data.hodgdon.com/cartridge_load.asp

#5: Re: reloading 30-06 shells Author: SingleShotLover, Location: Illinois

Posted: Wed May 20, 2009 5:40 am
----
Everyone seems to be on the same page, including me. Slow down! Make sure you understand loading and research the data thoroughly. No one is trying to hold you back, but we want you to be safe.

#6: Re: reloading 30-06 shells Author: kentucky hareraiser, Location: kentucky

Posted: Fri May 22, 2009 6:39 pm
----
BEEN RELOADIN' FOR YEARS. HAVE SEVERAL MANUALS AND ALOT OF COMPUTER SITES WITH DATA INCLUDING THIS ONE AND ALL ARE DIFFRENT.. JUST FIGURED Y'ALL HAD SOME TRIED AND TRUE RECIPES YOU HAD ALREADY TESTED AND LIKED FOR 165 GR. BULLETS ,VARGET AND IMR4064.. THANK'S AGAIN FOR THE ADVICE THOUGH

#7: Re: reloading 30-06 shells Author: Grumulkin, Location: Central Ohio

Posted: Fri May 22, 2009 8:38 pm
----
I've had excellent success with Varget and 165 & 168 grain bullets in my 30/06. Right off the top of my head, I don't remember how main grains of Varget I used but I know that the same load worked very well with Hornady Interbonds, Nosler BTHP match bullets, Barnes TSX and Barnes Banded Solids.

I've never used IMR 4064 for 30/06 loads.

#8: Re: reloading 30-06 shells Author: Bushmaster, Location: Ava, Missouri

Posted: Sat May 23, 2009 9:58 am
----
Alright Kentucky hareraiser (no need to shout)...If you have it in stock or look it up in one of your manuals. My favorite load for .30-06 (Browning A-bolt) is Winchester or Remington cases with 58 to 59 grains of H4831SC under a 165 grain Sierra HPBT Game King. Pick your primer. I use CCI 200...

#9: Re: reloading 30-06 shells Author: robfromaz1977, Location: Arizona's White Mountains

Posted: Sat May 23, 2009 10:49 am
----
One of my favorite loads is 58 grains of IMR 4350 using 165 grain Sierra Game Kings. Use Federal brass and Winchester standard rifle primers.

#10: Re: reloading 30-06 shells Author: Pumpkinslinger, Location: NC foothills

Posted: Sat May 23, 2009 3:45 pm
----
Sorry for being a little short. Some recent discussions had me a little put out about people starting to reload without bothering to read anything about how to do it properly. I interpreted your question as coming from someone like that. I apologize.

As for the .30-06... I don't have one! Yet... Wink

#11: Re: reloading 30-06 shells Author: kentucky hareraiser, Location: kentucky

Posted: Sun May 24, 2009 6:50 am
----
hey guy's ,,,was not shoutin' ,,just did'nt realize i had the letterin' set to capital letters .. did'nt know that was what capital letters ment though.. i'll know next time .. sorry !!!!!! thought y'all knew i'd been reloadin'a while . pumpkinslinger... i too get tote up all to pieces when i here of a new reloader tryin' to do stuff half ass ,fraid he will blow his dang self and a good gun up :-and bushmaster ,if it seemed i shouted at ya ,man i am truly sorry .friends like y'all are hard to come across. best forum for the knowledge and advice......grumolkin,,varget is the powder of my choice .too in the 308 win. /w barnes triple shock --165 gr. x bullet.. imr-4064 dose a good job too,though,,,,and robfromaz thank's for yopur input too... to let y'all know i started out with a safe load of 46 gr,varget /// 46.6 of imr4064 shot them safely and now i have 4 of each loaded with 47 gr varget and 47.5 imr4064 anf gonna try them today.. thank's for the concern shown here for beginning reloaders and i too,feel the same way.hope i did'nt pee anyone off /w the earlier post.. next time i have a reloadin' question ,i'll be sure to say i have been reloadin' for some tme now Very Happy

#12: Re: reloading 30-06 shells Author: Bushmaster, Location: Ava, Missouri

Posted: Sun May 24, 2009 7:02 am
----
Aah...You didn't "pee" anyone off. I was just funnin' ya anyway... Very Happy

We try to make sure that everyone on here is on the same page... Smile

#13: Re: reloading 30-06 shells Author: wiersy111, Location: Central Minnesota

Posted: Sun May 24, 2009 8:50 pm
----
I'm new to these forum and one thing I have learned is to be careful how you state your questions or posts. If written the incorrect you may get less then desired results. I shoot 150's in my 30-06's and of course both guns shoot different loads. my Smith & Wesson 1500 likes 57.5gr IMR 4350 and the Remington likes 59 gr IMR 4350.

#14: Re: reloading 30-06 shells Author: packnheat, Location: Alvin, Tx.

Posted: Mon Jan 04, 2010 2:10 pm
----
I have an Interarms Mark X 30-06 and have had great success with IMR 4064 powder loading Hornady 165 grain Spire points and 165 grain SST bullets. I have used anywhere from 48.2 to 50.1 grains of IMR 4064 powder, the 50.1 being considered the max load. I have found that 49.0 grains of powder gives me the tightest groups. It pushes these bullets at around 2750 FPS. If I am not mistaken, the cartridge O.A.L. was 3.230. I used winchester staynless rifle primers. I have not had much luck with lighter bullets, my rifle really likes 165 and 168 grain bullets.

#15: Re: reloading 30-06 shells Author: slimjim, Location: Fort Worth TX

Posted: Thu Jan 07, 2010 5:56 am
----
You might check the Reloading Database Module. It's link is in the top left corner of this web page.

-> Reloading Ammunition

All times are GMT - 7 Hours

Page 1 of 1