SCOPE RINGS

slipshot · Member Joined: Sep 06, 2008 Posts: 37 Location: Texas

Check any of the major ring maker sites and they have a drawing showing dementional drawings for there rings. All that I have seen will measure from the top of the base to the bottom of the U shape in the ring.

If you looking for a setup for your gun and scope combination any of the providers will offer guidance as to the lowest set of rings.

I wonder why Burris decided there XTR Rings needed to be $40 higher there everyone elses. There are a lot of people building high quality rings for picninny bases. I guess because it has "Tactical" in the name.......

Dimitri · Super Member Joined: Nov 25, 2005 Posts: 5944

Your scope rings are measured where "B" is. So bottom of the rings base where it touches the dovetail to bottom of the hole which clamps the scope.

By the way Pennicatty/M1913 rings only work on M1913 spec rails. They will not fit a Weaver style dovetail. But Weaver style rings will fit a M1913 mount.

Dimitri

TRBLSHTR · Posted: Sun Oct 19, 2008 10:26 am Post subject: Re: SCOPE RINGS

Maybe this will help; www.warnescopemounts.com/home.html

Bushmaster · Posted: Sun Oct 19, 2008 10:45 am Post subject: Re: SCOPE RINGS

Hey...That's out there where I grew up. Or real close anyway...Tigard

TRBLSHTR · Posted: Sun Oct 19, 2008 12:13 pm Post subject: Re: SCOPE RINGS

Yea bushy-they used to be in clackamas were I could deal directly/out the door,but now they have moved to tigard I can't find them without a gps coordinate! wtf

Bushmaster · Posted: Sun Oct 19, 2008 1:43 pm Post subject: Re: SCOPE RINGS

Used to ride my Roadmaster balloon tired 26" bycicle from Tigard to Tualatin. Not to mention... I did my early fishing and swimming in the Tualatin River south of Tigard. Used to pull bluegill, perch, large mouth and small mouth (rock) bass and an ocasional trout out of that river years ago (1950-58)...

1895ss · Posted: Tue Oct 21, 2008 9:51 pm Post subject: Re: SCOPE RINGS

You mean there were bikes when you were a kid??????????????? Shocked

Holy smoke........... who-d a thought??????? Very Happy

Vince · Posted: Tue Oct 21, 2008 11:57 pm Post subject: Re: SCOPE RINGS

1895ss wrote:

You mean there were bikes when you were a kid??????????????? Shocked

Holy smoke........... who-d a thought??????? Very Happy

:hah:

Oh you are a bugger of a man 1895ss Very Happy

...I love ya like a brother mate.

Cheers, Vince

Bushmaster · Posted: Wed Oct 22, 2008 6:33 am Post subject: Re: SCOPE RINGS

He spends most of his time far away and never talks to us anymore, but when he does he has to disrespect of his elders. Only problem is I'm not that much of a senior to him. In fact if the truth be known, he might just be older then me. I saw him on one of those BIG wheeled bycicles not long ago...Well...Actually...He was on the ground because a horseman ran him off the road... ROFL

Well hello 1895zz...Wher you been. Filling in pot...Oh that's right painting white lines...Such is the artist that you are... Very Happy

Vince · Posted: Wed Oct 22, 2008 8:10 pm Post subject: Re: SCOPE RINGS

Now now Bushy....our mate has been a busy man. There has been plenty of line marking for him to do.

Cheers, Vince

Bushmaster · Posted: Thu Oct 23, 2008 6:01 am Post subject: Re: SCOPE RINGS

Aah...1895ss' "signature work"...

slipshot · Member Joined: Sep 06, 2008 Posts: 37 Location: Texas

Now thats not the road to be on after you had 1 or 3 to many to drink!!!!!!

1895ss · Posted: Thu Nov 06, 2008 11:39 pm Post subject: Re: SCOPE RINGS

Hahahahahaha , no guys, we don't have any roads like that. Where's the yellow center line??????????? Very Happy

By the way Bushy, you are way older then me............. at least 9 - 10 yrs lol Very Happy

Bushmaster · Posted: Fri Nov 07, 2008 9:37 am Post subject: Re: SCOPE RINGS

Aah, but I'm just a wee young laddie.

What? You mean they put you back on the end of a shovel again? Fillin' in those chuck holes are we...?