View previous topic :: View next topic |
Author |
Message |
DallanC Site Admin
Joined: Jan 18, 2005 Posts: 3571 Location: Utah
|
Posted: Fri Jul 07, 2006 7:06 pm Post subject: Wanted 300 Wby using the 200 Accubond |
|
Moved to Reloading Forum:
kreifelsm wrote: |
I am looking for a load for my 300 Wby using the 200 Accubond and either RL-25 or IMR 7828 powder. |
|
|
Back to top |
|
|
george20042007 Super Member
Joined: Jan 27, 2006 Posts: 568 Location: Arizona
|
Posted: Sat Jul 08, 2006 8:54 am Post subject: Re: Wanted 300 Wby using the 200 Accubond |
|
Before I can offer help, I need to know if you are loading Remington or Weatherby cases.
Keep it coming...
|
|
Back to top |
|
|
kreifelsm Rookie Member
Joined: Jun 14, 2006 Posts: 3 Location: Colorado Springs CO
|
Posted: Sat Jul 08, 2006 7:58 pm Post subject: Re: Wanted 300 Wby using the 200 Accubond |
|
I have a majority of Remington cases. I also have 50 hornady and approx the same in the weatherby cases. I shpuld have mentioned this initially...my bad
|
|
Back to top |
|
|
george20042007 Super Member
Joined: Jan 27, 2006 Posts: 568 Location: Arizona
|
Posted: Sat Jul 08, 2006 8:48 pm Post subject: Re: Wanted 300 Wby using the 200 Accubond |
|
Keep in mind you should start at 10% less. Remington case, Federal 215 primer, 80 grns of IMR 7828 powder, COL 3.5 inches, for a 200 grn bullet, 2912 FPS @ 60,900 psi.
For a 200 grn Nosler Partition, same primer, same COL, same case, 83.2 grns of RL-25 for 2940 FPS @ 59,700 psi. (My load).
Remember to start at 10 % less, look for pressure signs as you work up. Neither of these loads are for the 200 grn Accubond, but, I don't know why you couldn't use it for either of the above loads.
Have fun.
Keep it coming...
|
|
Back to top |
|
|
kreifelsm Rookie Member
Joined: Jun 14, 2006 Posts: 3 Location: Colorado Springs CO
|
Posted: Sun Jul 09, 2006 8:04 am Post subject: Re: Wanted 300 Wby using the 200 Accubond |
|
Thanks a bunch...I'll start loading some today, and let ya know how it turns out after I get to the range
|
|
Back to top |
|
|
george20042007 Super Member
Joined: Jan 27, 2006 Posts: 568 Location: Arizona
|
Posted: Sun Jul 09, 2006 12:14 pm Post subject: Re: Wanted 300 Wby using the 200 Accubond |
|
Good shooting
Keep it coming...
|
|
Back to top |
|
|
kreifelsm Rookie Member
Joined: Jun 14, 2006 Posts: 3 Location: Colorado Springs CO
|
Posted: Thu Sep 14, 2006 1:02 pm Post subject: Re: Wanted 300 Wby using the 200 Accubond |
|
Ok, it has taken me awhile to get out to the range but finally I was able to get away from work and home. I used Hornady brass for this load and it worked out fantastic. With my Mark V deluxe the groups were right at a 1/2 in at 100 yds.
200 Nosler Accubond
Fed 215M primer
81.5 Grns RL-25
COL-3.6
|
|
Back to top |
|
|
|