KABOOM

Dawgdad · Posted: Fri May 30, 2014 10:05 am Post subject: Re: KABOOM

The best gauge to get would be one made with the reamer used to chamber your rifle...

PaulS · Posted: Fri May 30, 2014 6:28 pm Post subject: Re: KABOOM

With production guns that would be very difficult to do. It would easier with a custom gun. Just order an extra few inches of barrel and tell your smith you want a gauge made to equal your chamber. You might have to do the cutaway yourself but hey, it's only time.

English Mike · Posted: Mon Jun 02, 2014 2:26 pm Post subject: Re: KABOOM

PaulS wrote:

With production guns that would be very difficult to do. It would easier with a custom gun. Just order an extra few inches of barrel and tell your smith you want a gauge made to equal your chamber. You might have to do the cutaway yourself but hey, it's only time.

Now that IS a good idea.
I'm mulling over the idea of a custom 22-250 & getting a gauge reamed to the chamber size should be a simple thing & not too expensive.

slimjim · Posted: Mon Jun 02, 2014 4:55 pm Post subject: Re: KABOOM

They gauge I have for the .223 has a go-no-go milled into the base and the bore side is max COAL - 2.260" to fit in the magazine. Very helpful