Best Powder for the 25-06
-> Reloading Ammunition

#1: Best Powder for the 25-06 Author: petrey10 PostPosted: Thu Dec 28, 2006 2:15 pm
    ----
What do you guys think the best powder for the 25-06 is? I have been leaning towards H4350. But I am asking the experts on the board for some guidance.

#2: Re: Best Powder for the 25-06 Author: ShipsterLocation: Oregon PostPosted: Thu Dec 28, 2006 2:26 pm
    ----
petrey10 What grain of bullet are looking at using?

#3: Re: Best Powder for the 25-06 Author: sniperLocation: Utah PostPosted: Thu Dec 28, 2006 4:12 pm
    ----
petrey10 wrote:
What do you guys think the best powder for the 25-06 is? I have been leaning towards H4350. But I am asking the experts on the board for some guidance.

I would wager that H4350 will be the go to powder. The IMR powder is one of the classics for that case size, but H4350 works just as well. H4831 works very well, also.

Do some research in a reloading manual or three, then pick the powders that give the highest velocity for the bullet weight,(which will probably contain H4350 and/or H4831 somewhere in there) and you will like what you can do with it.

Be safe! Very Happy

#4: Re: Best Powder for the 25-06 Author: petrey10 PostPosted: Thu Dec 28, 2006 5:00 pm
    ----
Well I right now I am shooting 85 gr nosler ballistic tips... At sometime I might switch to Hornady 75 gr or 87 gr... shoot coyotes mostly

#5: Re: Best Powder for the 25-06 Author: 1895ssLocation: Not Here...!! PostPosted: Thu Dec 28, 2006 5:16 pm
    ----
petrey10 wrote:
What do you guys think the best powder for the 25-06 is? I have been leaning towards H4350. But I am asking the experts on the board for some guidance.

I have found that both IMR 4831 and IMR 7828 work very well in my 25-06 with IMR 7828 working the best.

#6: Re: Best Powder for the 25-06 Author: huntingstoneboy PostPosted: Mon Jan 01, 2007 8:21 pm
    ----
I just started working up coyote loads for my 700 25-06 with a 75gr. Vmax bullet. Today I had some nice groups (half inch) using imr 4350. The loads are just about max in the latest hornady book, should be getting velocity at just under 3600fps.

#7: Re: Best Powder for the 25-06 Author: minerfileLocation: St. Johns, AZ PostPosted: Thu Jan 04, 2007 8:04 pm
    ----
I've been using H4831 with 85 gr BT's with excellent results out of my Ruger VT (less than 1/2" groups at 100 yards). Absolutly brutal on PDs.

#8: Re: Best Powder for the 25-06 Author: 1895ssLocation: Not Here...!! PostPosted: Thu Jan 04, 2007 8:08 pm
    ----
Welcome to the site minerfile........ it's a great place to hang your hat. Laughing

#9: Re: Best Powder for the 25-06 Author: HandloaderLocation: Phoenix, Arizona PostPosted: Thu Jan 04, 2007 11:10 pm
    ----
Reloder 19 has been a favorite of mine with 100gr and lighter bullets. It has given my two 25-06s the best velocity and accuracy.

#10: Re: Best Powder for the 25-06 Author: ShipsterLocation: Oregon PostPosted: Fri Jan 05, 2007 11:47 am
    ----
both Handloader and 1895ss have both powders that work well for me, 100 gr bullets and smaller Reloader 19 heavier bullets goes to IMR7828. Good velocity and accuracy with both powders.

#11: Re: Best Powder for the 25-06 Author: killahog PostPosted: Tue Feb 20, 2007 9:53 pm
    ----
I have had good sucess with 4831sc and RL19 shooting a 100g sierra hpbt match bullet in my 25-06 AI

#12: Re: Best Powder for the 25-06 Author: minerfileLocation: St. Johns, AZ PostPosted: Fri Feb 23, 2007 9:14 pm
    ----
I've been using 59.0g H4831sc with 85g Nosler BTs with excellent results in my Ruger VT. 1/2" groups! and absolutly explosive on varmits.



-> Reloading Ammunition

All times are GMT - 7 Hours

Page 1 of 1