#1: Is there any firing pin rebound spring in Rossi Puma? Author: gelandangan, Location: Sydney AustraliaPosted: Sun Dec 06, 2015 2:37 am ---- Pull mine apart clean it and reassemble..
I think I lost it.
I cannot see it in the parts diagram, either I am blind or there is none..
Gah
It is Rossi Puma .357 magnum circa 1990 ish, the older one without safety on the slide.
#2: Re: Is there any firing pin rebound spring in Rossi Puma? Author: dhc4ever, Location: Ipswich, Queensland AustraliaPosted: Sun Dec 06, 2015 5:39 am ---- If this is the gun you have, rossi 92, then looks like no spring on the firing pin.
It has an ejector spring though.
#3: Re: Is there any firing pin rebound spring in Rossi Puma? Author: BigBlue, Location: Lehigh Township, PennsylvaniaPosted: Sun Dec 06, 2015 7:14 am ---- If it's the same as my Rossi R92, they can be a bugger to take apart and put back together. I took it apart for some cleaning and to replace the ejector spring. For the life of me, I don't remember a spring on the firing pin. Mine had the bolt mounted safety which I replaced with Steve's Guns peep sight.
#4: Re: Is there any firing pin rebound spring in Rossi Puma? Author: Vince, Location: Brisbane AUSTRALIAPosted: Sun Dec 06, 2015 7:17 am ---- I think the Rossi is a copy of the Winchester Mod 1892 and earlier Mod 94, so no, there is no firing pin spring mate.
#5: Re: Is there any firing pin rebound spring in Rossi Puma? Author: gelandangan, Location: Sydney AustraliaPosted: Sun Dec 06, 2015 2:29 pm ---- Ya thats the one M92.
I coulda swore that there were some rebound on the hammering face before..
I mustahafbeen mistaken.
Thanks guys.
#6: Re: Is there any firing pin rebound spring in Rossi Puma? Author: pete4d, Location: Dixie , Alabama , & LouisianaPosted: Sun Dec 06, 2015 7:04 pm ---- gelandangan,, check the diagrams on this site
#7: Re: Is there any firing pin rebound spring in Rossi Puma? Author: gelandangan, Location: Sydney AustraliaPosted: Sun Dec 06, 2015 7:13 pm ---- Thanks Pete, yes I did pore through the diagram.
Definitely no spring on the firing pin.
My memory must have played.. I am getting an introduction into the "oldies" club mayhaps.
#8: Re: Is there any firing pin rebound spring in Rossi Puma? Author: dhc4ever, Location: Ipswich, Queensland AustraliaPosted: Sun Dec 06, 2015 7:16 pm ---- Yep,
Thats how it starts.....