Below are the only loading data I found on .30-cal cartridges for Superformance.
hodgdon.com/PDF/SuperLever.pdf
I would stack the 300 WSM data with the rest of Hodgdon powders for a 130 grain bullet then compare those to 300 SAUM and derive your load data. As an example, it looks like the 300 SAUM takes about 2.5 grains less of Varget than the 300 WSM. Thus you max load would not be more than 74.5 g and the min would be 66.5 which is where I would start. Work up very slowly and be wary of pressure signs. H414, H4350, W760 are about 2.0 gr less so the 2.5 gr delta is more conservative.
300 WINCHESTER SHORT MAGNUM
CASE: WINCHESTER
BBL: 24"
PR: WINCHESTER LRM
130 GR. HDY SP .308" 2.720" 77.0C 3645 62,600 PSI
150 GR. SPR GSSP .308" 2.780" 74.0 3410 63,500 PSI
155 GR. HDY A-MAX .308" 2.860" 73.5C 3405 63,500 PSI
165 GR. NOS PART .308" 2.860" 72.0 3273 63,500 PSI
300 RUGER COMPACT MAGNUM
CASE: HORNADY
BBL: 24"
PR: WINCHESTER LRM
150 GR. HDY IB .308" 2.830" 67.0C 3254 59,000 PSI
155 GR. NOS HPBT .308" 2.830" 67.5C 3250 60,800 PSI
165 GR. BAR TSX .308" 2.800" 65.0C 3126 60,600 PSI
168 GR. SIE HPBT .308" 2.820" 65.5C 3125 63,300 PSI