Point Blank 2.0

Vince · Posted: Fri Feb 01, 2008 11:56 pm Post subject: Re: Point Blank 2.0

hunterjoe21 wrote:

frickin

Cheers, Vince

Vince · Posted: Sat Feb 02, 2008 12:01 am Post subject: Re: Point Blank 2.0

Dimitri wrote:

Guys,

Don't get me wrong I first learned how to use a computer on a PowerPC Performa with a CD-ROM drive and a 500mb Hard drive.

Dimitri

Hey 'Mitri....I cut my teeth on a Commodore 64 mate. I was going to upgrade to a Commodore 128 but couldn't afford it.

My next 'puter was a Datastar 386/8 (with Turbo up to 25), 80MB HDD, 2MB of RAM and a COLOUR dot matrix printer.....really state of the art.

Anywayz, back on topic. Dallan, you get PB 2.0 out when you are good and ready. Don't neglect your hunting duties just for us whingers mate.

Cheers, Vince

Dirty Harry · Posted: Mon Feb 18, 2008 2:39 pm Post subject: Re: Point Blank 2.0

KYGunner wrote:

Dallan had to start over it will probably be about 2 years before we get the program now. His computer crashed and lost everything.

Well BYTE ME!!!!! Is this true? Dallan, you really should keep backups. That's a lot of work down the tubes. My heartfelt commiserations.

Dirty Harry · Posted: Mon Feb 18, 2008 2:53 pm Post subject: Re: Point Blank 2.0

Vince wrote:

Hey 'Mitri....I cut my teeth on a Commodore 64 mate. I was going to upgrade to a Commodore 128 but couldn't afford it.

My next 'puter was a Datastar 386/8 (with Turbo up to 25), 80MB HDD, 2MB of RAM and a COLOUR dot matrix printer.....really state of the art.

Not bad. I cut mine on a Radio Shack TRS80 with expansion interface. Don't remember how much memory the thing had but it was something around 128k. What I remember most of that time was how everyone was so ga ga over 600baud dialup. Do you remember those cradles you stuck the phone in??? What pioneers we were. How many BBS's did you belong to? I later went to a Packard Bell desktop with 200mb HDD.

Bushmaster · Posted: Mon Feb 18, 2008 4:34 pm Post subject: Re: Point Blank 2.0

Yup Dirty Harry...I worked with the ones that you put the telephone receiver in a cradle and computed on a type writter that was attached to a big black box when I was in the US Navy. I believe that was around 1970- 72. I entered data for my ship as Engineer. I think it was attached or connected to SIMA in San Diego. I was stationed in Seattle at the time...Other then that I really don't remember much about it...

Dirty Harry · Posted: Fri Feb 29, 2008 6:44 am Post subject: Re: Point Blank 2.0

Bushmaster wrote:

Yup Dirty Harry...I worked with the ones that you put the telephone receiver in a cradle and computed on a type writter that was attached to a big black box when I was in the US Navy. I believe that was around 1970- 72. I entered data for my ship as Engineer. I think it was attached or connected to SIMA in San Diego. I was stationed in Seattle at the time...Other then that I really don't remember much about it...

Well shiver me timbers thar shipmate!! I retired from the navy in 1993 after 26 years. I sure did love it and I sure do miss it. Spent the majority of my career on the east coast and in the med.

Bushmaster · Posted: Fri Feb 29, 2008 7:47 am Post subject: Re: Point Blank 2.0

Ya got me by four years. Did 22 and 6 months. Retired off a mine sweep (USS Pledge MSO-492) Spent all my time in the Pacific and on West-pac. There are a bunch of us retireds on here. Both US, English and Aussie...

gelandangan · Posted: Fri Feb 29, 2008 5:36 pm Post subject: Re: Point Blank 2.0

Bushmaster wrote:

There are a bunch of us retireds on here. Both US, English and Aussie...

Yup exactly.. old farts Very Happy

not me though.. I am perpetually young

and by the look of my latest mortgage report, most likely will never retire either.. Mad

PaulS · Posted: Fri May 30, 2008 10:17 pm Post subject: Re: Point Blank 2.0

In 1978 I got my first TRS-80 model I, 16K ram updated to level II a year later. Then I got the expansion interface, two floppy drives and TRSDOS.
Programming was easy in BASIC and I made my first reloading / ballistics software with it.
Next upgrade was a 286 monster PC, then a Giant case 386 with four floppies, two hardrives and a removable media drive all with SCSI.
Man, I miss the DOS days................
Enough of this memory lane crap!
Dallan, is there anything we (I) can do to help? is there any progress?

Morax · Posted: Sat May 31, 2008 9:56 am Post subject: Re: Point Blank 2.0

PaulS wrote:

In 1978 I got my first TRS-80 model I, 16K ram updated to level II a year later. Then I got the expansion interface, two floppy drives and TRSDOS.
Programming was easy in BASIC and I made my first reloading / ballistics software with it.
Next upgrade was a 286 monster PC, then a Giant case 386 with four floppies, two hardrives and a removable media drive all with SCSI.
Man, I miss the DOS days................
Enough of this memory lane crap!
Dallan, is there anything we (I) can do to help? is there any progress?

i still have a copy of a database i made on a 5 inch floppy, i think it was 512k or something... heheh

lets not forget the phonetic modems, i got one of those laying around here someplace..

vomzion · Rookie Member Joined: Apr 21, 2008 Posts: 1

What new features do you all think the 2.0 version might include? I love the current version and have some ideas but I am sure everyone does.

Bushmaster · Posted: Sat May 31, 2008 4:28 pm Post subject: Re: Point Blank 2.0

Well...Welcome to this fine site...You DID pull a stump and grab a beer didn't you?

About the only way you will know if your ideas are good or ging to be used is to voice them here and see what Mr. Dallan has to say...

whittling · Posted: Sun Jun 01, 2008 1:50 am Post subject: Re: Point Blank 2.0

welcome

DallanC · Site Admin Joined: Jan 18, 2005 Posts: 3572 Location: Utah

vomzion wrote:

What new features do you all think the 2.0 version might include? I love the current version and have some ideas but I am sure everyone does.

Its a complete re-write with a new custom UI that is scaleable in size, has some re-organization to make things easier to use. The data is also reorganized into a much easier format. New features include metric / SAE support, angle calculations and a few other misc things.

-DallanC

Pumpkinslinger · Posted: Sun Jun 01, 2008 9:17 am Post subject: Re: Point Blank 2.0

If I remember correctly I saw somewhere that in version 2.0 loads would be listed under a particular firearm? I think that's a good idea. I would like to see an easy way to copy a load from one gun to another, just to save time when transferring info. Since I also load for handguns it would be nice if the minimum distance for trajectory could be less than 50 yards. However, I can live with 50!