KABOOM

Vince · Posted: Thu Apr 24, 2014 10:31 pm Post subject: Re: KABOOM

Suzanne wrote:

I think you should call your local bomb squad and tell them what you've got, they might have a suggestion or two. Those guys at least would be able to contain a just-in-case "problem" and it might be something fun for them to stew over.

Suz

Well, there ya go Suz, what a damn fine idea...this proves you are not just a pretty face mate.

slimjim · Posted: Fri Apr 25, 2014 2:43 am Post subject: Re: KABOOM

Elvis wrote:

how about setting it vertical with muzzle up

Go idea. That way the case will blow into the ground and I can recover it for inspection. Plus I don't risk gravity causing the firing pin block mechanism to fall into the breech during set-up. Thanks Elvis.

Aloysius · Posted: Fri Apr 25, 2014 2:59 am Post subject: Re: KABOOM

And what will happen to the cleaning rod?
(when the case still seals the chamber and bullet & C° go out the normal way)

I would probably put the barrel horizontally with something to catch what's leaving the barrel (your bullettrap on both sides?), put some black powder or other flamable stuff to the primer that I could ignite with a fuse (and that fire should start the initial primer when I'm on a safe distance). Use heat to start that primer (but add this heat only in a safe way).

It could be a nice test to see what enters the bullettrap most, the case or the bullet/rod Smile

but at the end or I will have an empty barrel or the primer and load is gone, both will make my situation better.

Bushmaster · Posted: Fri Apr 25, 2014 6:43 am Post subject: Re: KABOOM

Hey!! Would ya hurry up and do it. My curiosity has about had it.

slimjim · Posted: Fri Apr 25, 2014 6:58 pm Post subject: Re: KABOOM

Bushmaster wrote:

Hey!! Would ya hurry up and do it. My curiosity has about had it.

sorry Bushy, I'm in VA and NC this week and CA next week won't be home to do it until the first weekend in May.

slimjim · Posted: Fri Apr 25, 2014 7:01 pm Post subject: Re: KABOOM

Aloysius wrote:

And what will happen to the cleaning rod?
(when the case still seals the chamber and bullet & C° go out the normal way)

Be cause the bullet and cleaning rod have more mass, especially with the cleaning rod affixed to the bullets. I think it will stay in place and the brass case will be blown clear of the chamber. Horizontal .... I like that idea also. Thanks.

Aloysius · Posted: Sat Apr 26, 2014 1:10 am Post subject: Re: KABOOM

and cover it up with a wed towel or so that when things go wrong, it'll have a parachute to slow down its flight.

slimjim · Posted: Sun May 04, 2014 3:05 am Post subject: Re: KABOOM

KA-plop, Ka-plop, ka-plop, ka-plo, ka-pl, ka-p, ka-, ka, k, ....

A friend invited me to come over and use his silhouette range with steel plate backstops. We shot 22 LR at the test fixture from 40 meters. I don't think my test fixture was up to the task at hand and flexed too much being made out of wood. After a few smacks with the 22LR, I tried letting a hammer swing down and smack it while I was standing behind the steel backstop. The primer is peppered with marks but none looked sufficient to set it off. No dimple similar to a firing pin. Makes me wonder just how much force there is coming from a firing pin.

Time to come up with a better test fixture design. I have to rise to the challenge. This is personal now.

Vince · Posted: Sun May 04, 2014 4:15 am Post subject: Re: KABOOM

A flat head nail with the nose rounded, through a tube of some sort (a suitable size nut maybe) welded into a mount, and a small thick plate behind the head if the nail. Shoot the plate, drive the nail into the primer...detonation (hopefully). Have the nail and plate free floating to allow backward movement of the case.

slimjim · Posted: Sun May 04, 2014 6:25 am Post subject: Re: KABOOM

Vince, I was thinking along those lines, also. I will likely have to install the barrel back into the upper receiver to get proper alignment. May build a swinging hammer held up by a stick. shoot the stick and let the hammer swing down and dowel holding the nail. That way it won't be pointing at me when it goes off - I can mount it 90-degrees to the line of fire.

Elvis · Posted: Sun May 04, 2014 12:24 pm Post subject: Re: KABOOM

can a candle flame set off a primer????

Bushmaster · Posted: Sun May 04, 2014 5:58 pm Post subject: Re: KABOOM

Hell yes!! It can probably set of the powder too.

Pumpkinslinger · Posted: Sun May 04, 2014 8:15 pm Post subject: Re: KABOOM

You realize that we need video of all this...

DallanC · Site Admin Joined: Jan 18, 2005 Posts: 3572 Location: Utah

This is the most entertaining thread ever... Smile

I hope in the end the aggravation is worth it and it gets freed up. Whatever you do, do video it! If it turns out badly, the entertainment factor around here is enough we could probably do a fundraiser for you to buy a new barrel. LOL

-DallanC

dhc4ever · Posted: Sun May 04, 2014 8:56 pm Post subject: Re: KABOOM

Oh that smarts.
Remind me not to p you off Dallan........