Target location inside point blank

1911coltman · Rookie Member Joined: Oct 14, 2008 Posts: 2

Hello all,

I was wondering if someone could help me. The target location in pointblank seems to be mis-located. On the load information tab, my target is showing up over top of the Std. Dev. field. On the large target, the target appears off center and over laps the data on the left side of the screen.

I think this might be happening because I am using the larger fonts setting on my computer. Also, it might be an issue with the screen resolution that I am using. I am not sure about this.

Does anybody know of a way to correct this or know of a workaround? Any help would be appreciated.

Vince

Welcome 1911coltman. Grab a beer, pull up a stump and sit a while mate... someone with the necessary expertise should be along shortly to help you with this problem.

What you say about the big fonts setting may very well be the problem, but I am only guessing mate.

Cheers, Vince

DallanC · Site Admin Joined: Jan 18, 2005 Posts: 3572 Location: Utah

1911coltman wrote:

Hello all,

I was wondering if someone could help me. The target location in pointblank seems to be mis-located. On the load information tab, my target is showing up over top of the Std. Dev. field. On the large target, the target appears off center and over laps the data on the left side of the screen.

I think this might be happening because I am using the larger fonts setting on my computer. Also, it might be an issue with the screen resolution that I am using. I am not sure about this.

Does anybody know of a way to correct this or know of a workaround? Any help would be appreciated.

I dont think the old version ever got tested with large fonts... so off the top of my head it could very well have issues. I will double check this on the new version.

-DallanC