Windage and Elevation Caps

tcknight · Posted: Fri Nov 12, 2010 7:24 pm Post subject: Windage and Elevation Caps

Can ANYONE tell me how to find replacement scope caps?

Question #1: Are they all standard size and thread? Cuz, Pentax sells em for sure but I have a Simmons.

Question #2: Anyone got a dead Simmons scope they will sell me the caps off of? I have a ProHunter Master Series 6x42

Didn't know it would be so hard to find these. I constantly loose these things, you would think the scope manufacturers would have them readily available.

chambered221 · Posted: Fri Nov 12, 2010 7:47 pm Post subject: Re: Windage and Elevation Caps

Stoney point makes a target knob that fits Tasco, Simmons and Sightron scopes..........makes me think them 3 have the same thread !!!

You probably got a better chance at finding someone with a dead Tasco. Shocked

tcknight · Posted: Fri Nov 12, 2010 7:58 pm Post subject: Re: Windage and Elevation Caps

I hear ya on the dead Tasco. I chunked a number of them myself (ah...the beginning of the disposable scope era Smile

)

If you think they will fit Chambered, I'll take any cap from these three. I don't want target knobs or would order from Stoney Point. I didn't know they made them so thanks for that info.

This scope is on my Fireball until I can fund a FX3 for it. Since it is my calling rifle and everything is close in and fast, I have no use for target knobs which would tend to get caught up in clothing, limbs, and vines.

chambered221 · Posted: Fri Nov 12, 2010 8:09 pm Post subject: Re: Windage and Elevation Caps

Don't you dare put anything associated with Tasco anywhere near that Fireball.........you'll ruin it !!!

Didn't think ya wanted the knobs.......just used that to show they might work.

tcknight · Posted: Fri Nov 12, 2010 8:12 pm Post subject: Re: Windage and Elevation Caps

chambered221 wrote:

:wtf: Don't you dare put anything associated with Tasco anywhere near that Fireball.........you'll ruin it !!!

tcknight · Posted: Fri Nov 12, 2010 8:13 pm Post subject: Re: Windage and Elevation Caps

I'm a little desperate here since I hear da coyotes a yowling and can't take the scope out in the rain. Very Happy

DallanC · Site Admin Joined: Jan 18, 2005 Posts: 3572 Location: Utah

chambered221 wrote:

Stoney point makes a target knob that fits Tasco, Simmons and Sightron scopes..........makes me think them 3 have the same thread !!!

You probably got a better chance at finding someone with a dead Tasco. Shocked

Stoney Point no longer makes them. I bought a couple close out caps for Leupold scopes last year. I do remember Leupold and Simmons are different threads.

You can rarely find some on ebay though... but its hit or miss.

-DallanC

DallanC · Site Admin Joined: Jan 18, 2005 Posts: 3572 Location: Utah

Ok so I just went and looked over the box my Target caps came in. It states they made 3 types:

KL: Leupold
KT: Tasco/Simmons/Sightron
KB: Burris

I would assume those are the 3 different thread types / sizes. Hope this helps!

-DallanC

slimjim · Posted: Fri Nov 12, 2010 10:48 pm Post subject: Re: Windage and Elevation Caps

chambered221 wrote:

Don't you dare put anything associated with Tasco anywhere near that Fireball.........you'll ruin it !!!

Be nice now chambered, my first high-power scope was a Tasco 3-9. It never missed in its 45 years of service. Maybe they don't make 'em like they used to?

Elvis · Posted: Fri Nov 12, 2010 10:51 pm Post subject: Re: Windage and Elevation Caps

our trade me sight often has dead scope auctions from gunsmiths. guess they come in on guns having a new scope fitted. give your local lads a ring Im sure they will have a few hanging about.

tcknight · Posted: Fri Nov 12, 2010 11:40 pm Post subject: Re: Windage and Elevation Caps

DallanC wrote:

Ok so I just went and looked over the box my Target caps came in. It states they made 3 types:

KL: Leupold
KT: Tasco/Simmons/Sightron
KB: Burris

I would assume those are the 3 different thread types / sizes. Hope this helps!

-DallanC

Thanks Dallan, it does.

SingleShotLover · Posted: Sat Nov 13, 2010 8:26 am Post subject: Re: Windage and Elevation Caps

slimjim wrote:

Be nice now chambered, my first high-power scope was a Tasco 3-9. It never missed in its 45 years of service. Maybe they don't make 'em like they used to?

You are so right...they don't. I thankfully have several of the original Tasco Target/Silhouhette scopes in various power configurations and a couple of the "Pro" series handgun scopes that are nearly bullet-proof. Sadly, today's offerings don't measure up.

Dawgdad · Posted: Sat Nov 13, 2010 8:08 pm Post subject: Re: Windage and Elevation Caps

i might have a couple in my junk drawer I will trade you for the .243 brass. I am out of town right now but will verify tomorrow.

tcknight · Posted: Mon Nov 15, 2010 7:35 pm Post subject: Re: Windage and Elevation Caps

Dawgdad wrote:

i might have a couple in my junk drawer I will trade you for the .243 brass. I am out of town right now but will verify tomorrow.

Works for me. PM me when you get home.

tcknight · Last edited by tcknight on Thu Dec 02, 2010 7:38 pm; edited 1 time in total

Just a follow up for your information.

As we have discussed Bushnell bought out Simmons. They now own Bushnell, Simmons, and Tasco riflescope lines. When searching the Simmons site, there was no where to order parts or any email address. Switching over to the Bushnell website I found an email address for customer service and contacted them. They answered the very next day and pointed me to a web address to print out an order form to purchase replacement caps along with a number of other items. The form does not list Simmons as a "check this box" option but I was assured that I could use it to order the caps.

Looks like this will be pretty reasonable since the caps are 4 or 5 bucks but they only charge $1.00 shipping. Can't argue with that.

Well they impressed me with their quick response to my question. Now we'll see how they follow through. I'll let you know.

BTW. My nephew had a Simmons 8 Point scope in a drawer and offered the caps off of it. Of course, they would NOT FIT! Mad

Crazy; two scopes from the same manufacturer but without interchangeable windage or elevation caps. Who knew.