Fastest way I know of to get the copper out.......

Deleted_User_2665 · Super Member Joined: May 06, 2006 Posts: 380

As promised on another thread...here's my "field report" on Hoppe's Elite....A copper remover that I tried just for gits and shiggles...and will stick with from now on....

'Course this whole field test thing is a result of a bunch of discussion here on what's the best and the badest.......so humor me by reading on and take it for what it's worth....my own assessment of a product with zero invested other than I got a clean gun quick........you might like it too.

Set up...1 Ruger #1 in quarterbore-06...timer set at 30 minutes for countdown....1 spray bottle of Elite, 1 spray can of carb cleaner, a few patches, a bronze brush and a bore mop.

Step one...3 patches wet with carb cleaner pushed thru the bore...time down to 28:46......

Step two....soak the bore mop down with elite.......

vigorously attack the bore with multiple strokes, the Elite will form a blue foam at the muzzle...you are done when the mop appears white again....

Step three......wet a bronze bristle brush with elite and stroke the bore a bunch of times......time now down to 26:13.....

Step four....run patches wet with carb cleaner down the bore until you get a clean one.......

Here's the first one......

Time to the clean one is down to 23:04.....note the time line of patches from beginning to now, the very last patch is a dry one layed over the breech and pushed thru.......clean and white.

Step five....oiled the bore....

Step six...oiling the chamber....shocking ain't it?

Time down to 20:35 for a clean and oiled rifle, less than 10 minutes consumed...I'm sure I wasted a few seconds snapping all these pictures....<grin>

mc223

Something oddly similar about step 6.

I did enjoy the view out of the window.

Oh yeah the Elite is good stuff. I have been using TM solution from Sinclair. Just soak 2 patches in TM Solution and run down the bore, go do something else for about a half hour. Cme back, run a brush down the bore a couple times then patches till clean.

Vince

Thanks Wildswalker......a good honest report on what is obviously a good product.

Its good to actually see rather than hear about results.

Cheers, Vince

sniper

Thank you, sir. Great report. I am going to try that. Yes, I will. Smile

fishdog52 · Rookie Member Joined: Jun 15, 2006 Posts: 7

Nicely done! I just noticed the Elite line recently and was wondering if it was foo-foo marketing, or an honest attempt at an improvement. It seem that often "new and improved" means they have found a cheaper way to make it.
Good report!

Daveyboy · Member Joined: Jan 22, 2006 Posts: 143

I've got a bottle of Butch's boreshine that does the trick. Is this the same stuff?

D

ripper007 · Member Joined: Mar 05, 2006 Posts: 199 Location: Colorado

Thanks.
I realy like the way you set this up, easy to follow and well done.

I had read this post a while back.

after doing some better cleaning on my guns after reading more post from this site. I had noticed more of a greenish / bueish color on the cleaning patches.

after seeing that, I was sure , I was not cleaning my guns nearly good enough.
I had to come back and search for this post again .

Thanks.

I also want to thank PaulS for introducing me to some of the best home made gun oil. that he suggested to make. very easy and simple.

mix 50/50

dextron automatic transmission oil
Kerosine.

Thanks PualS

quote from Pauls post

Quote::

If you are low on money make your own gun oil:
Take 50/50 Dextron Automatic Transmission Oil / kerosine.
If you get a quart of each it will last you a lifetime, or you can sell it to your friends at $1 for a four once bottle. That way you can make a profit.
DON'T use engine oil in your gun. Engine oil will react with atmospheric water and make clay, and most motor oils have quantities of metal in it to add to the lubrication properties under heat and pressure.
Your gun will never get hot enough or see the pressure where the oil is, to make it work. In your gun it just causes problems.

PaulS

Ripper,
you're welcome but I can't take the credit. Ed Harris and a chemist friend of his (if memory serves) developed the formula while working on a cleaner for black-powder gun bores. The oil is the first part of the process in making "Ed's Red" bore cleaner. It is a water free way to clean your black-powder bores. Ed deserves all the credit as it was his persistance that rewarded us all with both products. He never made any money off the formula as far as I know. He is a true shooter and is willing to share his oil and cleaner with us. Ed's Red has no copper cleaning ability so it is not good for those of us who use copper jacketed ammo but if you are shooting lead bullets and / or black-powder then it is a gift to get away from hot water baths for your guns.

Dimitri · Super Member Joined: Nov 25, 2005 Posts: 5946

Well this made me convert so to speak Laughing

I went to Bass Pro and picked up a 4oz of the Gun cleaner for 7$ or so. Smile

Cant wait to try it out Very Happy

Dimitri

Luke Duke · Rookie Member Joined: Jun 10, 2007 Posts: 3

The Hoppes Elite line is essentially the same product as M-Pro 7.Hoppes approached Pantheon Chemical Company(who make M-pro 7)and asked them to develope a "Green"line of Gun maintenance and cleaning products that were non-toxic,biodegradable,non-carcinogenic etc.,Hoppes Elite being the result.

Dimitri · Super Member Joined: Nov 25, 2005 Posts: 5946

Luke Duke wrote:

The Hoppes Elite line is essentially the same product as M-Pro 7.Hoppes approached Pantheon Chemical Company(who make M-pro 7)and asked them to develope a "Green"line of Gun maintenance and cleaning products that were non-toxic,biodegradable,non-carcinogenic etc.,Hoppes Elite being the result.

Well atleast its non-toxic makes it alittle safer around kids I'd imagine then sweet sweet Hoppes No9. Shocked

By the way Luke, Welcome to the forums. Howdy

Dimitri

DallanC · Site Admin Joined: Jan 18, 2005 Posts: 3572 Location: Utah

Great write up wildswalker, why dont you edit your message, copy what you wrote, and submit it as an article? Would be a great reference for others!

-DallanC

Dimitri · Super Member Joined: Nov 25, 2005 Posts: 5946

Dallan,

Last time he posted was in January, hopefully he'll come back and post more. Smile

Dimitri

Bushmaster

And where is PaulS too...

tracker

Yeah, haven't heard from Paul in a while, hope all is well with him.