Need help

lesterg3 · Posted: Sun Feb 12, 2017 8:01 am Post subject: Need help

OK so I've been here for two years and I am finally setting up my reloading bench. But, my hands are not what they used to be and I am thinking I want to get an electronic powder measure. I am looking at the RCBS ChargeMaster, it sounds good to me, but I am wondering if it's as good as it sounds. What do you think, what are your experiences.

Pumpkinslinger · Posted: Sun Feb 12, 2017 10:13 am Post subject: Re: Need help

Hi Les! I use an electronic scale and dispenser (an old PACT) and really like it. I have had some trouble with fine, spherical powders though. I haven't used the RCBS but maybe the reviews at Midway will help you. And they have it on sale!

www.midwayusa.com/prod...o-110-volt

lesterg3 · Posted: Sun Feb 12, 2017 10:54 am Post subject: Re: Need help

That's certainly better than Cabela's. Thanks PS.

Vince · Posted: Sun Feb 12, 2017 3:55 pm Post subject: Re: Need help

I wish I could help Lester, but I am still using a balance beam scale too because the cost of a decent electronic scale is beyond me. Good luck with the search mate.

slimjim · Posted: Sun Feb 12, 2017 4:32 pm Post subject: Re: Need help

www.midwayusa.com/prod...trickler-2

lester3, if you are just concerned about the fine measurement to get the powder charge exactly spot on, you might consider a powder trickle. Just twist the knob and just a little comes out.

chambered221 · Posted: Sun Feb 12, 2017 7:41 pm Post subject: Re: Need help

My wife bought me the Hornady a few years back..... love it !!!

Vince · Posted: Sun Feb 12, 2017 10:57 pm Post subject: Re: Need help

slimjim wrote:

https://www.midwayusa.com/product/169955/rcbs-powder-trickler-2

lester3, if you are just concerned about the fine measurement to get the powder charge exactly spot on, you might consider a powder trickle. Just twist the knob and just a little comes out.

That is exactly what I do Slim. I throw the charge about .5gr short then trickle the rest into the pan. Makes the reloading process a little slower, but I find it improves the accuracy of the charge which is a bonus.

Elvis · Posted: Mon Feb 13, 2017 12:10 am Post subject: Re: Need help

cheap as set of LEE spoons will see you pretty plurry close Mate....and a powder trickler will get you the rest of the way in a jiffy.
dont chuck the manual balance beam...guys are going back to them when the novalty of electronic ones wears off..... manual is just more reliable...sometimes simple is best.

Ive got an accurate powder thrower but dont use it unless doing 30 or more loads...the spoons are as accurate and quick,n fact better if using chunky powder as the big granuals can block the thrower and give random weights.

lesterg3 · Posted: Mon Feb 13, 2017 4:52 am Post subject: Re: Need help

Thanks for all the feedback guys. In the past I have used a powder tickler and still have it, as the beam scale, and a complete set of powder cups. The issue is my hands, and the fine motor skills necessary to use those devices. Left hand is partially paralyzed, very little feeling, and has little to no dexterity and the right is getting worse. all from nerve damage. I just thought that the electronic would save a lot of aggravation.

Aloysius · Posted: Mon Feb 13, 2017 6:32 am Post subject: Re: Need help

maybe put a (small) motor on your powder tickler to solve that problem with your hands? One of this cheap battery operated screwdrivers could fix that for you.

As for me: being a chemical engineer I still use a small spoon and my fingers as I learned long time ago during lab-work and as long as I have a steady hand, why should I change to electronics?

Grey_Wolf · Member Joined: Aug 06, 2015 Posts: 186

I have the RCBS Chargemaster and love it. There are a couple of mods to do from the factory that made it better for me. The first one was to turn the damned beeping off! Beeps and such drive me nuts lol. The other was the MccDonalds straw in the tube that helps with powder flow. I have read that it needs to be warmed up and not placed near fluorescent lights though I haven't seen an issue with not warming up and don't have those lights in my room. I will occasionally check a charge to the balance beam and always calibrate before using - it's simple and they give you the weights.

Overall I'm happy I got it

TRBLSHTR · Posted: Mon Feb 13, 2017 1:03 pm Post subject: Re: Need help

I have one of the fancy lyman electronic monsters and wish that I would'nt have wasted the money for it.It is not as accurate as the old balance beam scale and trickler.I even put the speed up kit in it,and I still need to use the trickler.The thing will vary at times+or-.1 grain,which gives a max spread of .2!And it is affected by all sorts of forces like;opening or closing of a door(slight air movement),flourescent lights,radiowaves of nearby sources,magnetic fields from radios or televisions when turned on,probably cell phones then also-this I have not resurched yet!I now use this electronic mutha for a dust collector until I can get an aluminum 3 sided box made to cover it when in use to help to alleiviate some of the interferance of outside sources.Stay with the old school stuff-it's kinder to the bank account!

hunterjoe21 · Posted: Mon Feb 13, 2017 3:24 pm Post subject: Re: Need help

RFI (radio frequency interference) will affect most,if not all, of the lower priced electronic scales. After I reworked my garage back in Ohio and retrofitted the fluorescent lights (from T-12 to T-8) my RCBS scale went crazy on me. It took a while to figure out that the newer electronic ballasts were causing the issue. I took down the retrofitted fixtures directly above the loading bench and hung a couple original ones and the problem went away. I still couldn't use a radio in there when the lights were on though. I have a single 4' LED fixture above the bench in it's new home and don't seem to have any issues with it. I do find it necessary to turn off the furnace in the garage (air movement) and I can't use it too close to the radio. I hadn't really thought about the cell phone issue, but there may be something to it. I was working on some loads yesterday with the radio and furnace both turned off, but had my phone in my shirt pocket and noticed it wavering slightly every once in a while.

TRBLSHTR · Posted: Mon Feb 13, 2017 10:28 pm Post subject: Re: Need help

Maybe I'll start wearing my tin foil hat as well-might help. wtf

hunterjoe21 · Posted: Mon Feb 13, 2017 10:56 pm Post subject: Re: Need help

TRBLSHTR wrote:

:( Maybe I'll start wearing my tin foil hat as well-might help. wtf

Make sure you get some pictures...