Search found 1065 matches

Maybe Vince but I have seen that happen after a deep clean and it usually was because I had re -exposed any roughness in the bore and it took a few shots to lay down a little copper over those spots ...

You may need to turn down the necks if they are too thick now. After you put a bullet in the mouth it will really stick in the chamber. I don’t have that tool in my kit but it sound like that may b ...

CCI standard is available in many places now as low as $60 a brick. It shoots as well as the SK and Wolf Target in my rimfire target rifles. Give that a try and see if the group dials in better. I ...

Slim- I had a fat finger in my first post. I am running 2770 fps with the ELD at 27.9 gr. 100fps /gr is more reasonable....

I am using Starline brass and just processed some Hormady i had from factory. Yes it is a 24” barrel. I start with the Berger recommended 0.030” steps the. Tweak 0.010 either side of the best loa ...

Slim - If you need an accurate magazine length load... I have not been able to outshoot the Hornady 75BTHP Black ammo. If you ever are in a pinch and need some for a match under 800 yards... that stu ...

You did not disappoint me Slim. I will digest this and post some of my own observations as well.

[quote="slimjim"][quote="Vince"]... and on upwards to a whopping 90gr offering from Sierra.[/quote]

I'm shooting the 95gr SMK from Sierra in my 1:6.5 twist 224 Valkyrie (needles)[/quote]

Slim - ...

[quote="DallanC"]You think they were underfilled? Or a squib followed by a live round? Its hard to really overfill a 45ACP case... I can easily imagine an under filled case though.

And I never shoo ...

For lighter bullets I have found 26.5 -27.”gr W748 with a 52 or 53 gr bullet shoots sub moa in about any AR I shoot it in. OAL of 2.240”. With Varget fill up the car with 27.0-27.2gr.

For a 1: ...

I get a lot of correspondence from State Farm too and the letter head is always in Red and they use a different font in their type. (the font used in the letterhead with address on it) Large companie ...

I get the same thing with Chrome and the page freezes and can't even page down or scroll down with arrow keys or mouse roller...

Brass is a consumable expense of reloading. It does not last forever. work hardening will cause the splits and annealing can give you extra life from brass but eventually primer pockets get loose neck ...

[quote="PaulS"]I suppose that off camera he was a gentle man with a huge heart. He will be missed.[/quote]

He truly was. I had the chance to meet him and speak with him at the National Rifle Matche ...

[quote="stovepipe"]So- this rifle is getting some well worth and deserved upgrades- from glass, to stock, to bi-pod, and it's about time.

Side note: There's a lot of interwebs chatter going on now ...