7 TCU loads with WIN 296

309jdj · Rookie Member Joined: Dec 15, 2007 Posts: 1

I was told there are some loads out there that were developed for the 7TCU using WIN 296 powder and was wondering if anyone can help me to find them. I am not having any luck. Since H110 is virtually the same let me know if you have heard of any of these.
309jdj

jameslee · Posted: Thu Dec 27, 2007 12:18 pm Post subject: Re: 7 TCU loads with WIN 296

Lyman had two loading for the 7TCU using H110 and cast bullets (gas check bullets) they were 135gr (#2 alloy) started H110 14.4grs max. 18.0grs and the 150gr (#2 alloy) H110 start 13.6gr and max. 17.0grs I hope this might help. JIM Cool

SwampFox · Posted: Thu Dec 27, 2007 1:22 pm Post subject: Re: 7 TCU loads with WIN 296

309JDJ,
Welcome to the nut house. Pull up a stump grab a cool brew and join in.

H-110 and 296 are not very good powders for the 7TCU. H-4227, AA2230, R#7, H-4895 and WW 748 are much better.

Welcome again,
Ed